AUTONET TV

Steering You Right (Power Steering Signs of Problems)

Nearly every modern vehicle on the road today has power steering, a wonderful invention that makes steering take far less effort than it did in the "good old days."  Today, we take our steering for granted: until something goes wrong, that is.

Most power steering these days is rack-and-pinion, the rack being a metal bar between the front wheels with notches in it and the pinion being a gear whose teeth fits into those notches.  Adding power assist makes it easy to turn. That assist comes in the form of hydraulic fluid that is pressurized by a pump powered by the engine, an electric motor that adds a power assist or a system that uses both an electric motor and hydraulic fluid.

Your vehicle usually gives you a heads up that something is going wrong with its steering. Here are a few signs to look for:

• A humming, whirring, rubbing or grinding sound coming from you engine compartment when you turn.
• Signs of hydraulic fluid leaking, such as wet spots under your vehicle.
• The smell of burning oil while you're driving.
• Steering wheel hard to turn or vibrating.

If you notice any of these signs, it's a good idea to have a trained technician check them out.  They may be signs of:

• Power steering pump going bad
• Steering rack or gear seals wearing out, causing them to lose hydraulic fluid
• Broken fluid hose
• Defective power steering cooler
• Loss of pressure in the power steering gearbox
• Worn out steering pump belt
• Failing electric power steering motor

It's important to have these checked out sooner rather than later. You need to be able to steer properly in order to drive safely. Plus, some of these problems can cause more serious—and expensive—damage if they're not fixed.  Power steering is a wonderful feature of your vehicle.  Keep it well maintained and it will steer you right.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

A Bright Spark (Ignition Coil Replacement)

Ever wonder how your vehicle’s engine is able to take the 12-volts from its battery and ramp that up to as high as the tens of thousands of volts it takes to fire its spark plugs? The secret is something called an ignition coil.  Most newer vehicles have an ignition coil at each cylinder, but older ones have a coil that serves all of the spark plugs. 

There are telltale signs that you have an ignition coil problem.  As you might expect, one symptom is it’s hard to start your engine or it won’t start at all.  If your engine is misfiring or not running smoothly or you see the Check Engine light come on, those all could point to an ignition coil failure.

Several things can contribute to ignition coil trouble in addition to normal wear and tear. Moisture and dirt may have gotten inside the coil, plus the heat and vibration of your engine over time can contribute to them going bad.  Bad spark plugs or plug wires can also be a cause.  

While ignition coils can last 100,000 miles/160,000 km, depending on how you drive and in what conditions.  If you start noticing some of the signs and symptoms just described, it’s a good idea to schedule a visit to see us so a technician can diagnose what’s wrong. Driving too long with an engine misfiring can damage your catalytic converter, and that can be expensive to replace.

A technician will thoroughly check your ignition system and determine where the failure is.  If it’s only one coil that’s bad, it may be the only thing that will need replacing.  If your vehicle has a distributor, it may also need to be replaced.  Properly-working ignition coils will help your vehicle operate at its best and help prevent future engine damage.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

THE IMPORTANCE OF VISIBILITY (Cleaning Vehicle Glass)

We've all been through it. The vehicle ahead of us kicks up mud, slush, snow or salt on our windshield and we can't see a thing.  And not being able to see a thing when we're driving?  Not a good thing.

Debris on a vehicle's glass can be blinding when driving directly into the sun.  And other things can ruin visibility: scratches on the glass, fogged windows, mineral deposits. 

So lets make one thing clear:  Your windows.  Here are some tips.

• Number one rule, don't use abrasives on glass. That means no gritty cleaners that are made for metal.  Avoid at all costs those dark green abrasive pads on some kitchen sponges that are made to clean metal pots and pans UNLESS the manufacturer specifically says they can be used on glass.
• Use the appropriate cleaner for the substance that's being cleaned off. Special automotive glass cleaners are available, and your Steve & Stacy's Servicenter service advisor can make recommendations.
• Vinegar can work wonders. Sometimes you'll see hard, grayish water spots on your windows that nothing seems to take off. Distilled white vinegar (available in the grocery store) gets rid of them safely, quickly and easily.
• Use a microfiber cloth designed for cleaning glass; that's what professional detailers choose.
• Clean the insides of windows, too. That film that develops on the inside of vehicle windows can be the result of plastic interior surfaces decaying in the heat of sunlight (plastic contains oil). The film can also be caused by cigarette smoke. Clean that oily layer off thoroughly.

Now that you have clean windows, here's how to keep 'em clean.

• Replace your wipers at least once a year. Rubber deteriorates the older it gets, even if you rarely use your wipers.
• You might consider a newer type called a "beam" blade. Most have an aerodynamic design that cleans your windshield better, especially at higher speeds.

Your service advisor at Steve & Stacy's Servicenter will be able to recommend good wiper blades for your vehicle and install them properly.

Visibility.  See what we mean?

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com