AUTONET TV

Fuel System Cleaning at Steve & Stacy's Servicenter in Charleston for Better Performance

A fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.

Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.

The pressure in a fuel injection system varies depending on its type. Many gasoline engines use port injection systems, which operate with a pressure of 60 pounds per square inch. Newer direct injection systems operate at 10 to 30 times that pressure. Some diesel passenger vehicles have fuel injectors that operate at 30,000 pounds or more per square inch.

Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle.  It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine.

Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel economy and loss of engine performance.

So it's important to keep your fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name WV fuel companies also deliver a more consistent quality of fuel than do bargain stations in the Charleston area.

The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.

Check your owner's manual or ask the pros at Steve & Stacy's Servicenter in Charleston to find out how often you should change your fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.

You can also purchase cleaners that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use.

If your fuel injectors are gummed up, you can get a professional deep cleaning service at Steve & Stacy's Servicenter in Charleston that will result in better fuel economy and improved vehicle performance.

Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Smart Charleston Drivers Protect Against Overheating

Engines get hot when they run. This heat can build up and damage vital engine parts, so engines need a cooling system to keep them running. Cooling system failure is the most common mechanical failure in vehicles. This is unfortunate, because these failures are usually easy for Charleston drivers to prevent.

The radiator is the best-known and most recognizable part of the cooling system. Hoses filled with coolant (also known as antifreeze) connect the radiator to the engine. The coolant draws heat from the engine and then flows to the radiator. Air passing through cooling fans on the radiator cools the coolant. The coolant then cycles back into the engine to start the process over again.

The most critical component of the cooling system, however, is the coolant itself. A mixture of water and coolant/antifreeze helps keep it both from freezing and from boiling away. Either can result in serious engine damage.

Different engines require different types of coolant/antifreeze. The owner's manual will list what kind a vehicle requires. Using the wrong type or mixing different types of coolant/antifreeze may void the warranty on the cooling system and may damage it as well.

Insufficient coolant can lead to engine failure. Coolant levels need to be checked regularly and topped off as necessary. If coolant levels drop quickly or consistently, the cooling system should be inspected for leaks. Coolant/antifreeze contains additives that protect the radiator and other coolant components from rust, scale and corrosion. Over time, these additives are depleted, so it is necessary for Charleston drivers to replace coolant at specified intervals. Changing coolant should be part of routine preventive maintenance for any vehicle.

This service is often ignored, though, since old coolant still cools the engine. Vehicle owners don't realize there is a problem until the system fails. They are left with major repairs and possibly a damaged engine, which could have been prevented with a cooling system service at Steve & Stacy's Servicenter in Charleston.

If your vehicle sends a warning message to check its coolant or if the temperature gauge is reading in the red or hot zone, then the cooling system needs serviced. This service is critical and should not be put off since the potential for damage is high.

In an emergency situation, water or antifreeze can be added to your vehicle so that it can be driven to a service center for proper car care. For this reason, your owner's manual contains instructions for how to top off insufficient coolant – allow 45 minutes for the engine to cool before attempting to add coolant or water. However, the fluid should be added to the coolant overflow bottle, not to the radiator itself. Removing the radiator pressure cap can result in severe burns.

Topping off in an emergency, however, does not fix the problem. The vehicle should immediately be taken to Steve & Stacy's Servicenter in Charleston where they can inspect the cooling system, repair any leaks and clean it if necessary. They can identify what caused the emergency situation in first place and ensure it doesn't happen again.

Regular maintenance of a vehicle's cooling system is just good auto advice for Charleston drivers. Cooling system service is relatively inexpensive and doesn't take long at Steve & Stacy's Servicenter. Lack of it, however, can put a vehicle in the scrap heap.

Talk to our service advisor at Steve & Stacy's Servicenter for more information. 

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Have a Ball! Know your Ball Joints (Ball Joints)

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint.

One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time.

Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly.

Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintenance; others require periodic lubrication.

Here are some signs that your ball joints are going bad:

• Your vehicle pulls to one side
• You can hear a clunking noise coming from a wheel area
• Your tires are wearing unevenly, especially on the inside

The earlier a failing ball joint is discovered, the better. The best way is to have regular inspections by a technician.  Your service facility will periodically check ball joints at intervals recommended by the manufacturer. The cost to replace them can vary widely depending on whether you have a vehicle with a 2-ball or 4-ball configuration.  Also, sometimes just the joints can be replaced, but other times they are part of a larger control arm assembly that has to have all the parts replaced at the same time. 

Your vehicle's proper steering, handling and tire wear all contribute to a better, safer driving experience.  Make sure your ball joints are up to the job.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Direct Fuel Injection Update from Steve & Stacy's Servicenter

For those of you in Charleston, WV who pay attention to these things, you may have been hearing about the new direct injection engines and want to learn more about them. Some deliver the power of a V8 with the economy of a V6.

For example, in one family of engines the conventional V6 makes about 250 horsepower. The direct injection version of the same engine makes over 300 horsepower and gets essentially the same fuel economy. The turbocharged version makes over 350 horsepower.

So what are the differences from a conventional engine?

The core difference is in the fuel injection system. The system most vehicles use now is called a port injection system. The fuel injector squirts fuel into a port just outside the cylinder where it's then drawn into the engine with the air.

With a direct injection system, the injector squirts the fuel directly into the cylinder. The gain in power and economy come because fuel injected directly into the cylinder during the combustion cycle is burned much more efficiently.

First, the fuel is squirted in at hundreds of times more pressure, so it's atomized much better and burns cleaner and stronger. The other big advance is in electronics. Faster engine management computers can control the additional precision required to manage direct fuel injection.

Fuel injectors are precision instruments. They have to deliver a precise amount of fuel at exactly the right time. The design of the engine also dictates a particular spray pattern for the fuel. If a fuel injector is dirty or gummed up, it can't do its job as well. That means less power and worse fuel economy for your vehicle and can lead to damaged fuel injectors.

Replacing fuel injectors at Steve & Stacy's Servicenter isn't cheap. Direct injection injectors are even more expensive because of the extremely high-pressure they use. Same thing for diesel fuel injectors; we're talking mortgage payment-range to replace a set of diesel injectors.

A professional fuel system cleaning from Steve & Stacy's Servicenter gets out the gum and varnish in the whole system, including the fuel injectors. Keep those injectors clean and they'll last a long, long time.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com