AUTONET TV

Reaching the Braking Point (Brake hose replacement)

If you notice your brakes aren’t working like they used to, that’s the kind of thing that’s important to have checked out soon.  That’s because your brakes are extraordinarily important to the safe operation of your vehicle. 

Sometimes you feel like your brake pedal is feeling a little soft or it’s lower than usual. Or you might feel like the brakes are on all the time, holding you back. Maybe when you release the brake pedal, it comes back up more slowly than usual. There are a few different problems that can cause your brakes to feel like any of those things, so bring your vehicle in to us and we can inspect them.

One possible cause of those brake issues is a damaged or worn-out brake hose.  Your hydraulic brakes work by carrying brake fluid to each of your wheels.  There are steel lines that carry the fluid most of the way, but because your wheels are moving all the time, a flexible hose is used to connect the steel lines and the brakes themselves.  

Sometimes those brake hoses leak, since there’s a lot of pressure inside when you use your brakes dozens or hundreds of times a day.  Road debris, aging, and corrosion at the hose fittings can loosen up that connection.  Sometimes the hoses can get blocked up if the interior lining separates from the outside. And sometimes, it’s simply a matter of the hose getting too old, and age eventually causes the rubber to fail.

When you experience brake problems, bring your vehicle in so we can have a technician take a look. Visual and manual inspections can usually pinpoint the problem areas.  The technician will look for corrosion and physical damage, plus run a pressure check.

For your vehicle to be safe on the road, your brakes need to be working the way they were designed to.  Stop. And think about it!

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Positive Crankcase Ventilation ? PCV Valve Service at Steve & Stacy's Servicenter

Hello Charleston! Did you know that the first federally-mandated emissions control device was introduced in the 1960's? The Positive Crankcase Ventilation valve, or PCV valve, has been installed in WV vehicles since 1964 and represents the first legislation by the United States government to regulate harmful emissions as well as to improve performance in the country's vehicles.

The PCV valve, as you can probably guess, is located on the crankcase. The crankcase is the lowest part of a vehicle's engine. It houses the crankshaft and the engine oil. The crankshaft connects to the pistons that power the engine.

Pistons are pushed down when fuel is burned in an engine. This causes the crankshaft to rotate, which sends power to the transmission.  It ultimately turns the axles and causes the vehicle to move. Some of the gases released by the burning fuel squeeze around the pistons and down into the crankcase.

If the escaped gases mix with the engine oil in the crankcase, oil sludge develops. This sludge has the consistency of petroleum jelly and can cause damage by clogging up passageways in the engine. Further, escaped gases can build up pressure inside the crankcase that can blow out seals and gaskets.

Before 1964, a hose was attached to the crankcase that vented escaped gases out into the air. These gases contained about 70% unburned fuel as well as harmful emissions. The PCV valve was designed to curb these harmful emissions as well as recapture unburned fuel.

The PCV valve is a small, one-way valve that allows escaped gases to exit the crankcase. The gases are then routed into the intake system so they can be re-burned in the engine. Fresh air enters the crankcase through a breather tube to facilitate this circulation and keep the air in the crankcase clean.

The PCV valve, like most working parts on a vehicle, will wear out over time. Usually it simply gets gummed up. Preventive maintenance, including routine oil changes at Steve & Stacy's Servicenter in Charleston, will extend the life of the valve, but eventually it will have to be replaced. A sticking PCV valve won't allow gases to circulate properly, which can increase pressure in the crankcase. Over time, that pressure will lead to oil leaks.

Your vehicle manufacturer recommends that a PCV valve be replaced every 20,000 to 50,000 miles (32,000 to 80,000 kilometers), depending on the vehicle and Charleston driving conditions. It's an inexpensive repair but may not be included in the maintenance schedule in your owner's manual.  So if you're looking for auto advice about the PCV valve, you may have to ask our pros at Steve & Stacy's Servicenter.

Taking care of our PCV valve protects the environment in WV and improves vehicle performance. It's just part of good vehicle care for Charleston drivers and a way all of us can do our part to improve the world we live in.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

Looking Down the Road - Headlamps

If you've ever been driving around Charleston and had a headlamp go out, you've probably just wanted to replace the bad bulb. If your car uses halogen headlamps, they dim over time. So if you just put in one, they won't have the same brightness, which can be distracting and will affect your field of vision.

To have your headlights inspected, visit us at Steve & Stacy's Servicenter. We're at 130 Virginia Street W in Charleston, WV 25302. Or give us a call at (304) 343-4611.

Experts at Steve & Stacy's Servicenter recommend replacing your halogen headlamps every year. It's easy to remember if you do it when Daylight Saving Time changes in the fall. That way you'll have bright headlamps for those long WV winter nights.

There are other types of headlamps in addition to halogen. There are the old standard bulbs that have been around for decades. These are OK, but you can usually upgrade to halogen. They cost a little more but you can't believe the difference. If you do a lot of night driving you might want to use a premium halogen bulb that filters out the yellow hues and gives a very white light that's a lot like daylight.

You may have noticed those bluish headlights on luxury cars. They are high intensity discharge or, HID lamps. They really light up the road. You can upgrade to HID on some vehicles. These cost quite a bit, but they'll last for the life of your car. If you want your friends to think you have HIDs, you can get halogens with a bluish tint - no one needs to know.

Seriously, though, night driving is all about reaction time – time to stop – time to get out of the way. You can't react to what you can't see. You need headlamps that'll give you a good view down the road and good peripheral vision as well. Your headlights need to be aimed correctly so you can see and to keep your lights from shining off into oncoming traffic.

You may have seen older vehicles with headlights that are awfully dim and maybe even yellow. That's because the plastic headlight lenses have gotten cloudy and yellowed with age. They can be replaced, but many Charleston service centers offer a service to restore the lens that's a lot cheaper.

You can't drive if you can't see. AAA reports that nine out of ten vehicles have dirty or yellowed headlamps. So run the window squeegee over your headlights when you gas up to clear the dirt and bugs. Get your lenses restored if they need it and don't forget to replace your standard or halogen bulbs every fall.

Steve & Stacy's Servicenter
130 Virginia Street W
Charleston, WV 25302
(304) 343-4611
http://www.steveandstacysservicenter.com

For 4x4s (Maintenance of 4x4 Vehicles)

Some people love 4x4 vehicles, the true 4-wheel drive works of engineering like Jeeps and 4x4 pickups that allow you to seemingly go anywhere on the planet. You can climb up a 40-degree rock trail with some planning and skill (always careful to protect the environment, of course), or you can get through the deepest snow.

But with that added capability comes additional complexity, drive-train components and other systems that less capable vehicles don't have.  And that is why when it comes to 4x4s, you have to maintain them a little differently from those vehicles that spend their lives on pavement.  Here are some of the key things to keep an eye on:

• Transfer case—This transfers power from the engine to the wheels.  A transfer case has fluid in it that needs to be changed at intervals recommended by the manufacturer.  Your service advisor will let you know how often that is and will keep track of your service dates.  You will need to make sure the transfer case seal is working properly.  Otherwise, transmission fluid could get in and cause damage that is costly to fix.  Some transfer cases have an electric motor that shifts it through gears, and its connections are often exposed to the elements, making them vulnerable to damage and corrosion.  Proper maintenance will keep those connections working like they should
• Front and rear differentials—These also have to have the right amount of fluid and should be checked regularly.  Your service advisor can let you know when you need that fluid changed as the owner's manual recommends.  It's important the service is performed correctly with the proper lubricant so it will work the way it is designed to.
• Brake lines—Those 4x4s practically beg to go into wet spots. They also are great machines to conquer snow: road salt, brine and all.  Moisture, salt and brake lines are a recipe for corrosion, so brake lines need to be inspected regularly.  There are anti-corrosion sprays or white lithium grease that can retard corrosion.  Remember, getting there is half the fun, but not being able to stop is no fun at all.

So enjoy your 4x4 and what it can do that other vehicles can't.  Just remember that even though it's tough on the outside, it needs special care to keep it going.  Oh, and remember to take care of the environment when you go off-roading, too.